PRODUCTS LIST
CONTACT US
- Address：West of Beihuan Road ,Muye District,Xinxiang City,HeNan P.R China
- Mobile：+86 18568231957
- Tel：0373-2611121
- Fax：0373-2611121
- OnLine QQ：2456689896
- E-mail：overseas02@zlqyc.com
- Web：http://www.zlqyc.com
NEWS
Product News
Product News
Litho Sheetfed Offset Sublimation Ink (CMYK, 1kg/can)
Advantages
1. High transfer rate.
2. Excellent color reproduction, gorgeous color, not color cast.
3.No crust in 28-30 days (open the cover),save 20% compared with other ink when printing on machine
4. Applicable to synthetic fabrics such as polyester fabric, smooth feel comfortable, no hard feeling.
5.Transferred pattern scratch-resistant, washable, non-cracking, no peeling, no fading, and good weather resistance.
1. Use Principle
2. Excellent color reproduction, gorgeous color, not color cast.
3.No crust in 28-30 days (open the cover),save 20% compared with other ink when printing on machine
4. Applicable to synthetic fabrics such as polyester fabric, smooth feel comfortable, no hard feeling.
5.Transferred pattern scratch-resistant, washable, non-cracking, no peeling, no fading, and good weather resistance.
1. Use Principle
It is used on all kinds of offset machine. With the ink,first print image on paper with the offset press, then transfer the image onto various materials by heat transfer press, especially for polyester fabric. Under high temperature, the ink will become gas and go into fabric.
2. Use Scope
2. Use Scope
It can be used on all kinds of offset machine. (single-color, two-color and multicolor offset printing machine which supply single paper once)
3. Transfer Paper
Coated paper, offset paper, chrome paper and cardboard paper.
4. Suitable Fabrics
Polyester fabric, Triacetate fabric, Nylon fabric, Acrylic fabric, Polypropylene nitrile. (All kinds of synthetic fabrics)
5. Colors
Magenta, Yellow, Cyan, Black (or other colors according to customer’s requirements).
6. Use Method
(1)Be able to adapt to the demand for middle-speed or high-speed printing.
(2)During the normal condition, use the ink on the machine directly.
7. The printing process just needs 3 steps
(1)Print the image on paper, and normal paper is ok.
(2)Put the printed paper on substrate, such as polyester and nylon fabric.
(3)Put the paper and fabric on the heat-transfer machine. When the temperature reaches 180-220°C, the image will be transfer printed from paper onto the substrate.
8. Product Characteristics Product characteristics
* No Crust
a.Granula size is less than 5 micron.
b.No crust in 28-30 days. (open the cover)
* Safety
Passed SGS,DGM,MSDS,totally environment-friendly!
* Advantages
Good stability on the machine,clear dot reproduction,excellent ink-water balance.
Be able to adapt to the demand for middle-speed or high-speed printing.
During the normal condition, use the ink on the machine directly.
*P.S. please make samples before the final printing to confirm the exactly image.
9. Transfer temparature
About 185~220°C
10. Transfer time
About 20~40 seconds
11. Application examples
a.To get 50%C on fabric,the color on paper should be 30%C
b.To make red PS-plate,the ratio is 100%M and 35%-40%Y
c.To make blue PS-plate,the ratio is 100%C and 20%M
d.To make green PS-plate,the ratio is 80%C and 90%Y
e.To get yellow like Asian skin,the ratio is 10%~11%M and a little cyan.Cyan can be adjusted according to your requirment
12. For alumina plate,stainless steel plate,copper plate and porcelain with coating,the transfer temperature can refer to the above table.
The following is the transfer printing parameters for your reference
3. Transfer Paper
Coated paper, offset paper, chrome paper and cardboard paper.
4. Suitable Fabrics
Polyester fabric, Triacetate fabric, Nylon fabric, Acrylic fabric, Polypropylene nitrile. (All kinds of synthetic fabrics)
5. Colors
Magenta, Yellow, Cyan, Black (or other colors according to customer’s requirements).
6. Use Method
(1)Be able to adapt to the demand for middle-speed or high-speed printing.
(2)During the normal condition, use the ink on the machine directly.
7. The printing process just needs 3 steps
(1)Print the image on paper, and normal paper is ok.
(2)Put the printed paper on substrate, such as polyester and nylon fabric.
(3)Put the paper and fabric on the heat-transfer machine. When the temperature reaches 180-220°C, the image will be transfer printed from paper onto the substrate.
8. Product Characteristics Product characteristics
* No Crust
a.Granula size is less than 5 micron.
b.No crust in 28-30 days. (open the cover)
* Safety
Passed SGS,DGM,MSDS,totally environment-friendly!
* Advantages
Good stability on the machine,clear dot reproduction,excellent ink-water balance.
Be able to adapt to the demand for middle-speed or high-speed printing.
During the normal condition, use the ink on the machine directly.
*P.S. please make samples before the final printing to confirm the exactly image.
9. Transfer temparature
About 185~220°C
10. Transfer time
About 20~40 seconds
11. Application examples
a.To get 50%C on fabric,the color on paper should be 30%C
b.To make red PS-plate,the ratio is 100%M and 35%-40%Y
c.To make blue PS-plate,the ratio is 100%C and 20%M
d.To make green PS-plate,the ratio is 80%C and 90%Y
e.To get yellow like Asian skin,the ratio is 10%~11%M and a little cyan.Cyan can be adjusted according to your requirment
12. For alumina plate,stainless steel plate,copper plate and porcelain with coating,the transfer temperature can refer to the above table.
The following is the transfer printing parameters for your reference
| Name of fabric | Transfer temperature | pressure | Time |
| Polyester fabric | 205°C~220°C | 0.5kg/cm2 | 10~30 seconds |
| Polyester deformation fabric low elastic | 195°C~205°C | 0.5kg/cm2 | 30 seconds |
| Triacetate fabrics | 190°C~200°C | 0.5kg/cm2 | 30~40 seconds |
| Nylon fabric | 195°C~205°C | 0.5kg/cm2 | 30~40 seconds |
| Acrylic fabric | 200°C~210°C | 0.5kg/cm2 | 30 seconds |
| Two acetate fiber fabric | 185°C | 0.5kg/cm2 | 15~20 seconds |
| Polypropylene nitrile | 190°C~220°C | 0.5kg/cm2 | 10~15 seconds |
Dye degree:(European Standard)
| Color fastness | ||||
| Color | Magenta | Yellow | Blue | Black |
| Rank | 5-6 | 6 | 5 | 6 |
Please be noted
The control of the colors is always carried out after the transfer of the final supports.
The relationship between the temperature and the time of contact is important in order to have the optimal color resistance and ink penetration (the longer the time of transfer, the better the ink penetration of the fabric).
Packing
1kg/tin,12kg/carton.carton inside,wooden outside.
Contact:
Ms Daisy
Export Manager
Henan Zhongliqi Printing Material Co.,Ltd
Tel: +0086-373-2611121
Fax: +0086-373-2611121
Mobile: 86-15516474131
MSN: daisyzlq@hotmail.com
Skype: daisyzlq
