- Address:West of Beihuan Road ,Muye District,Xinxiang City,HeNan P.R China
- Mobile:+86 18568231957
- Tel:0373-2611121
- Fax:0373-2611121
- OnLine QQ:2456689896
- E-mail:overseas02@zlqyc.com
- Web:http://www.zlqyc.com
Product News
HOT!!! CMYK sublimation offset ink for Coated paper
HOT!!! CMYK sublimation offset ink for Coated paper
It is used on all kinds of offset machine.With the ink,first print image on paper,then transfer the image onto various materials by heat transfer press,especially for polyester fabric.Under high temperature,the ink will become gas and go into fabric.It belongs to gas shading.
Sublimation offset ink printing materials:Coated paper,coating paper,offset paper and all kinds of paper
Offset ink Features:solid speed,good stability on the machine,clear dot reproduction,excellent ink-water balance.
A series of thermal ink color: Magenta,Yellow,Green, Black.
Use the methods and precautions
1.It can be directly on the machine under normal circumstances;
2.Because of temperature,paper,printing speed and other factors,according to the following rule changes;
- To speed up the drying can be added to the mixed desiccant, the dosage of 0-2%;
-With a special diluent;
-To adjust the liquidity available 6 # Printing Mexican oil, the amount of 0-5%;
-Descending paper sticky, remained liquidity unchanged, available to the viscosity, the amount of 0-5%;
-While reducing the viscosity and viscosity, can add 52-94, the amount of 0-5%.
Notice:sublimation offset ink apply to offset printing machine.Speed is below 8000r/h.Before using the printing plate you should Play the sample first ,if there is no deviation and then determine the comp Engraving and Printing. Because the sublimation ink for gas coloring, it is not ordinary printing according to the proportion .
Application examples:
a. To get 50%C on fabric, the color on paper should be 30%C;
b. To make red PS-plate, the ratio is 100%M and 35%-40%Y;
c. To make blue PS-plate, the ratio is 100%C and 20%M;
d. To make green PS-plate, the ratio is 80%C and 90%Y;
Transfer temperature (for reference)----- Aluminum plate,stainless steel,copper and porcelain coated,the thermal transfer the desired temperature can refer to the temperature of the polyester fabric.
Name of fabric Transfer temperature pressure Time Polyester fabric 205°C~220°C 0.5kg/cm2 10 ~ 30 seconds Polyester deformation fabric low elastic 195°C~205°C 0.5kg/cm2 30 seconds Triacetate fabrics 190°C~200°C 0.5kg/cm2 30~ 40 seconds Nylon fabric 195°C~205°C 0.5kg/cm2 30~ 40 seconds Acrylic fabric 200°C~210°C 0.5kg/cm2 30 seconds Two acetate fiber fabric 185°C 0.5kg/cm2 15 ~ 20seconds Polypropylene nitrile 190°C~220°C 0.5kg/cm2 15 ~ 20seconds
Dyeing solid (grade) red 5-6/yellow 6/green 4/black 4
Packing specification 1-2 kg/tin Shelf life is three years (from date of production )