CHINESE | ENGLISH
WEB MAP | HOME | CLOOECTION
SERVICE:0373-2611121
PRODUCTS LIST
CONTACT US
  • Address:West of Beihuan Road ,Muye District,Xinxiang City,HeNan P.R China
  • Mobile:+86 18568231957
  • Tel:0373-2611121
  • Fax:0373-2611121
  • OnLine QQ:2456689896
  • E-mail:overseas02@zlqyc.com
  • Web:http://www.zlqyc.com
NEWS
Product News

High quality thermal transfer sublimation ink

  High quality thermal transfer sublimation ink

  High quality thermal transfer sublimation ink

It is used on all kinds of offset machine.With the ink,first print image on paper,then transfer the image onto various materials by heat transfer press,especially for polyester fabric.Under high temperature,the ink will become gas and go into fabric.It belongs to gas shading.
Printing materials:Coated paper,coating paper,offset paper and all kinds of paper
Offset ink Features:solid speed,good stability on the machine,clear dot reproduction,excellent ink-water balance.
Color:Magenta,Yellow,Green, Black.
Use the methods and precautions
1.It can be directly on the machine under normal circumstances;
2.Because of temperature,paper,printing speed and other factors,according to the following rule changes;
To speed up the drying can be added to the mixed desiccant, the dosage of 0-2%;
With a special diluent;
To adjust the liquidity available 6 # Printing Mexican oil, the amount of 0-5%;
Descending paper sticky, remained liquidity unchanged, available to the viscosity, the amount of 0-5%;
While reducing the viscosity and viscosity, can add 52-94, the amount of 0-5%.
Notice:sublimation offset ink apply to offset printing machine.Speed is below 8000r/h.Before using the printing plate you hould Play the sample first ,if there is no deviation and then determine the comp Engraving and Printing. Because the sublimation ink for gas coloring, it is not ordinary printing according to the proportion .
Application examples:
a. To get 50%C on fabric, the color on paper should be 30%C;
b. To make red PS-plate, the ratio is 100%M and 35%-40%Y;
c. To make blue PS-plate, the ratio is 100%C and 20%M;
d. To make green PS-plate, the ratio is 80%C and 90%Y;
Transfer temperature (for reference)----- Aluminum plate,stainless steel,copper and porcelain coated,the thermal transfer the desired temperature can refer to the temperature of the polyester fabric.

Name of fabric
Transfer
temperature
pressure
Time
Polyester fabric
205220
0.5kg/cm2
1030 seconds
Polyester deformation fabric low elastic
195205
0.5kg/cm2
30 seconds
Triacetate fabrics
190200
0.5kg/cm2
3040 seconds
Nylon fabric
195205
0.5kg/cm2
3040 seconds
Acrylic fabric
200210
0.5kg/cm2
30 seconds
Two acetate fiber fabric
185
0.5kg/cm2
1520 seconds
Polypropylene nitrile
190220
0.5kg/cm2
1015 seconds
 Dyeing solid (grade)

exposure to sunlight
    red
yellow
   green
black
5-6
6
4
4

Packing specification 1-2 kg/tin   Shelf life is three years (from date of  production).

Share to: MORE

HOME | ABOUT US | NEWS | PRODUCTS | STRENGTH | TECHNICAL | GUESTBOOK | CONTACT
Keyword:
CopyRight © 2010-2011 Henan Zhongliqi Printing Material Co.,Ltd  
Address:West of Beihuan Road ,Muye District,Xinxiang City,HeNan P.R China   Mobile:+86 18568231957   Tel:0373-2611121   QQ:2456689896   Fax:0373-2611121