- Address：West of Beihuan Road ,Muye District,Xinxiang City,HeNan P.R China
- Mobile：+86 18568231957
- Tel：0373-2611121
- Fax：0373-2611121
- OnLine QQ：2456689896
- E-mail：overseas02@zlqyc.com
- Web：http://www.zlqyc.com
PRODUCTS
Good Color Fastness Transfer Offset Sublimation Ink (ZHONGLIQI)
Good Color Fastness Transfer Offset Sublimation Ink (ZHONGLIQI)
Sublimation Transfer Characteristics
<1> High transfer rate.
<2> Excellent color reproduction, gorgeous color, not color cast.
<3> Applicable to synthetic fabrics such as polyester fabric, smooth feel comfortable, no hard feeling.
<4> Transferred pattern scratch-resistant, washable, non-cracking, no peeling, no fading, and good weather resistance.
1. Use Principle
It it used on all kinds of offset machine. With the ink,first print image on paper, then transfer the image onto various materials by heat transfer press, especially for polyester fabric. Under high temperature, the ink will become gas and go into fabric.
2. Use Scope
Offset (one color, two color and four color machines)
3. Use Method
(1)Be able to adapt to the demand for middle-speed or high-speed printing.
(2)During the normal condition, use the ink on the machine directly.
4. The printing process just needs 3 steps
(1)Print the image on paper, and normal paper is ok.
(2)Put the printed paper on substrate, such as polyester and nylon fabric.
(3)Put the paper and fabric on the heat-transfer machine. When the temperature reaches 180-220°C, the image will be transfer printed from paper onto the substrate.
5. Suitable Fabrics
Polyester fabric, Triacetate fabric, Nylon fabric, Acrylic fabric, Polypropylene nitrile.
6. Transfer Paper
Coated paper, offset paper,chrome paper and calendered paper.
Transfer paper should be 80-90 gr/m2 with dimensional stability.
7. Colors
Magenta,Yellow,Cyan,Black.
8.Advantage
(1)Good stability on the machine,clear dot reproduction,excellent ink-water balance.
(2)Be able to adapt to the demand for middle-speed or high-speed printing.
(3)During the normal condition, use the ink on the machine directly.
9. Transfer temparature
About 185~220°C
10. Transfer time
About 20~40 seconds
11. Application examples
a.To get 50%C on fabric,the color on paper should be 30%C
b.To make red PS-plate,the ratio is 100%M and 35%-40%Y
c.To make blue PS-plate,the ratio is 100%C and 20%M
d.To make green PS-plate,the ratio is 80%C and 90%Y
e.To get yellow like Asian skin,the ratio is 10%~11%M and a little cyan.Cyan can be adjusted according to your requirment
12. Please be noted
For alumina plate,stainless steel plate,copper plate and porcelain with coating,the transfer temperature can refer to the above table.
The following is the transfer printing parameters for your reference
|
Name of fabric |
Transfer temperature |
pressure |
Time |
|
Polyester fabric |
205°C~220°C |
0.5kg/cm2 |
10~30 seconds |
|
Polyester deformation fabric low elastic |
195°C~205°C |
0.5kg/cm2 |
30 seconds |
|
Triacetate fabrics |
190°C~200°C |
0.5kg/cm2 |
30~40 seconds |
|
Nylon fabric |
195°C~205°C |
0.5kg/cm2 |
30~40 seconds |
|
Acrylic fabric |
200°C~210°C |
0.5kg/cm2 |
30 seconds |
|
Two acetate fiber fabric |
185°C |
0.5kg/cm2 |
15~20 seconds |
|
Polypropylene nitrile |
190°C~220°C |
0.5kg/cm2 |
10~15 seconds |
Dye degree:(European Standard)
|
Color fastness |
||||
|
Color |
Magenta(HPA604) |
Yellow(HPA204) |
Blue(HPA404) |
Black(HPA804) |
|
Rank |
5-6 |
6 |
4 |
4 |
Please be noted
The control of the colors is always carried out after the transfer of the final supports.
The relationship between the temperature and the time of contact is important in order to have
the optimal color resistance and ink penetration (the longer the time of transfer, the better the ink penetration of the fabric).
Packing
1kg/tin,12kg/carton.carton inside, wooden outside.
More information, please contact:
Ms Fanny
E-mail:overseas@zlqyc.com
Mobile:86-15670532217
MSN: fanny201288@hotmail.com
Skype: fanny20121016
